Dear visitor, welcome to KDE-Forum.org.
If this is your first visit here, please read the Help. It explains in detail how this page works.
To use all features of this page, you should consider registering.
Please use the registration form, to register here or read more information about the registration process.
If you are already registered, please login here.
modem commands anyone?
Newb has new dialup connection with Intel 536ep internal PCI modem in MDK 10.0.(kernel 2.6.x) Modem drivers on disk were outdated so used latest Intel 536ep chipset drivers and that installed and compiled OK. Configured in Kppp. Connection seems fine, and browsing OK so far, but downloading files from different sites to test modem, and all keep stalling, then I guess there is a reconnect and it continues..stalls....continues...etc. I am able to dwnload 1 to 3mb files but anything more is a hassle. This modem and also the ISP tests out OK on a Wxp Pc on the exact same phone line. Maybe some settings in the modem commands dialogue box?
The settings in the Kppp are:
modem device: /dev/modem
flow cntrl: hdwr (have tried sftwr and none)
line term: cr/lf
conn speed: I have tried 38000 to 115200
lock file: checked
mdm timeout: 30 sec.
Authentication PAP/CHAP
preinit delay- 50
init string1 -ATZ
init string2 -have tried several
post init dly -50
dial speed -70
init resp -ok
no tone det -atx3
dial string -atdt
conn resp -connect
busy resp – busy
no carrier – no carrier
no tone – no tone
hangup -+++ATH
hngup resp -ok
answer strng -ata
ring – ring
ans -connect
dlp resp -digital line detected
escape +++
esc resp – ok
guard time -50
vol off/lo/hi M0L0/ MIL1/ MIL3
SECURITY SETTINGS ARE – poor
firewall set to ALLOW CONNECTION TO EVERYTHING
maybe someone can see a simple error and help out.
Thanks
This post has been edited 2 times, last edit by "Trio3b" (Feb 20th 2005, 7:09am)
