K3b Cant burn because of Permissions I think...

Beginner

Sunday, September 24th 2006, 3:55pm

Cant get to burn any cd with it... Cant do anything with nerolinux either, as it gives me kinda the same error. Basically, I think its a permission error with cdrecords, but I dont know how to fix this. Each time I chmod it, it sets itself back with root only to execute. The only thing I can take to burn cd's is Gnome CD/DVD creator, and it doesnt burn audio cd, only data... This is the included error message from K3B... anyone? Thanks very much
ps. I am using Suse 10.1 and Its a clean install I havent touched anything yet.

Source code

System
-----------------------
K3b Version: 0.12.16

KDE Version: 3.5.1 Level "a" 
QT Version:  3.3.5
Kernel:      2.6.16.13-4-default
Devices
-----------------------
HL-DT-ST DVDRAM GMA-4080N 0H35 (/dev/sr0, /dev/sg1) at  [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]

Used versions
-----------------------
cdrecord: 2.1

cdrecord
-----------------------
[B]/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.[/B]
[U]
Can that be the problem? I tried changing its permission to a+rwx but it comes back to 755 each time by itself when I go back in the setup k3b dialog box...[/U]

scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
/usr/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 JÃ¶rg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugs.opensuse.org/
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GMA-4080N'
Revision       : '0H35'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 (current)
Profile: 0x000A 
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13165 kB/s 74x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
pregap1: -1
Track 01: audio   86 MB (08:35.01) no preemp copy
Track 02: audio   56 MB (05:38.24) no preemp copy
Track 03: audio   57 MB (05:42.16) no preemp copy
Track 04: audio   45 MB (04:29.69) no preemp copy
Track 05: audio   37 MB (03:41.97) no preemp copy
Track 06: audio   46 MB (04:35.54) no preemp copy
Track 07: audio   47 MB (04:43.72) no preemp copy
Track 08: audio   32 MB (03:10.85) no preemp copy
Track 09: audio   41 MB (04:04.38) no preemp copy
Track 10: audio   46 MB (04:35.96) no preemp copy
Track 11: audio   33 MB (03:19.34) no preemp copy
Track 12: audio   32 MB (03:14.06) no preemp copy
Track 13: audio   44 MB (04:26.40) no preemp copy
Track 14: audio   46 MB (04:35.25) no preemp copy
Total size:      659 MB (65:18.61) = 293896 sectors
Lout start:      659 MB (65:20/46) = 293896 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -12508 (97:15/17)
  ATIP start of lead out: 359845 (79:59/70)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 65949
Starting to write CD/DVD at speed 24 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 2 seconds.
   1 seconds.
   0 seconds.
 Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01:    0 of   86 MB written.
Track 01:    1 of   86 MB written (fifo 100%) [buf  99%]   1.1x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 02 1C 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63504
cmd finished after 0.016s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 1270080 bytes
Writing  time:   13.459s
Average write speed 292.9x.
Min drive buffer fill was 99%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:   28.666s
/usr/bin/cdrecord: fifo had 84 puts and 21 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 6 times full, min fill was 87%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=24 -tao -dummy driveropts=burnfree -eject -useinfo -audio -shorttrack /tmp/kde-matt/k3b_audio_0_01.wav /tmp/kde-matt/k3b_audio_0_02.wav /tmp/kde-matt/k3b_audio_0_03.wav /tmp/kde-matt/k3b_audio_0_04.wav /tmp/kde-matt/k3b_audio_0_05.wav /tmp/kde-matt/k3b_audio_0_06.wav /tmp/kde-matt/k3b_audio_0_07.wav /tmp/kde-matt/k3b_audio_0_08.wav /tmp/kde-matt/k3b_audio_0_09.wav /tmp/kde-matt/k3b_audio_0_10.wav /tmp/kde-matt/k3b_audio_0_11.wav /tmp/kde-matt/k3b_audio_0_12.wav /tmp/kde-matt/k3b_audio_0_13.wav /tmp/kde-matt/k3b_audio_0_14.wav

Go to the top of the page

bram85

Professional

Posts: 948

Location: Eindhoven

Occupation: Software Engineer

2

Sunday, September 24th 2006, 5:12pm

RE: K3b Cant burn because of Permissions I think...

I think you should run the K3b setup before trying to burn a CD/DVD. It's in the Settings menu, it asks for your root password and sets some permissions.

Bram Schoenmakers
KDE Netherlands (www.kde.nl)