You are not logged in.

Dear visitor, welcome to KDE-Forum.org. If this is your first visit here, please read the Help. It explains in detail how this page works. To use all features of this page, you should consider registering. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Sunday, January 29th 2006, 2:56pm

[SOLVED] KDE 3.5 on Dell Inspiron 9300 (Ati Mobility) hangs

Hey All,

Dell Inspiron 9300 (Ati Radeon Mobility x300)

I've spent many grueling hours trying to figure out what is wrong with my configuration. The problem is that when I startup KDE as my user it loads up I see the splash screen startup and a small kmix window pops up but then KDE hangs at that point, the only thing I can do is move my mouse around. Once it's hung I can't change to console at all I have to hard reset my laptop. I managed to change to console before it locks up and I see an unending stream of these messages:

kded: kmilo DellI8xMonitor: ioctl failed in fn_status()

It print these messages continuously and I think this is why KDE hangs. Here's another weird bit when I do switch to the console it actually goes farther into KDE for some reason I can hear the KDE wave play just fine but if I do alt-F7 it instantly hangs.

Here are the steps I've taken with this problem. I originally was using KDE 3.5 out of the gentoo ebuilds, then I tried KDE 3.4.3 both versions have identical problems. I have tried the ati-drivers from ATI and those lock up my computer the instant I start up the .run application. I am currently using ati-drivers-8.21.7 drivers out of the gentoo ebuild, but I've also tried the ati-drivers-8.14.13-r3 versions both have the same messages and lockup. The default radeon driver that comes with Xorg does the exact same thing too. If I startup normal X without KDE it seems to startup just fine but if it leave it running for 5mins or so things lock up on me.

I have installed the default gentoo-sources kernel 2.6.15-r1 and I've also tried the mm-sources-2.6.16-rc1 and linux-2.6.13-rsbac (tried this for an older version of kernel. All three had the same effect my KDE would hang. I used the same config in each. I have changed up my xorg.conf several times with different drivers and configs all result in the same problems.


I've tried without luck to find help on #gentoo and I thought I would try here as my last try. I appreciate any help.

Below are my xorg.conf and .config I've reconfigured my xorg.conf repeatedly with different drivers for mouse and everything I've no idea what is causing this.

.config
xorg.conf

This post has been edited 1 times, last edit by "Tambu" (Jan 29th 2006, 5:37pm)


2

Sunday, January 29th 2006, 5:36pm

Hey All,

I managed to solve my problems so I thought I would throw this up here for anyone having problems with inspiron 9300. I found this guys page with great instructions on getting 9300 going with gentoo / kde.

http://krosswindz.blogspot.com/2005/10/g…piron-9300.html

I followed his instructions and used his .config (even though it was for older kernel it worked) and I used his xorg.conf

The only thing I changed as that the newer kernel doesn't have the line:
#undef ATA_ENABLE_ATAPI

that he talks about so you can't do this. I found another way however to get ATAPI into the libata module here:

http://kerneltrap.org/node/5836

you just add libata.atapi_enabled=1 ide1=noprobe to your kernel boot or grub.conf parameters and it will detect the cdrom as /dev/sr0.

Good Luck
Thanks

This post has been edited 1 times, last edit by "Tambu" (Jan 29th 2006, 5:38pm)