Cant get to burn any cd with it... Cant do anything with nerolinux either, as it gives me kinda the same error. Basically, I think its a permission error with cdrecords, but I dont know how to fix this. Each time I chmod it, it sets itself back with root only to execute. The only thing I can take to burn cd's is Gnome CD/DVD creator, and it doesnt burn audio cd, only data... This is the included error message from K3B... anyone? Thanks very much
ps. I am using Suse 10.1 and Its a clean install I havent touched anything yet.
|
Source code
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
System
-----------------------
K3b Version: 0.12.16
KDE Version: 3.5.1 Level "a"
QT Version: 3.3.5
Kernel: 2.6.16.13-4-default
Devices
-----------------------
HL-DT-ST DVDRAM GMA-4080N 0H35 (/dev/sr0, /dev/sg1) at [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
Used versions
-----------------------
cdrecord: 2.1
cdrecord
-----------------------
[B]/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.[/B]
[U]
Can that be the problem? I tried changing its permission to a+rwx but it comes back to 755 each time by itself when I go back in the setup k3b dialog box...[/U]
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
/usr/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugs.opensuse.org/
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GMA-4080N'
Revision : '0H35'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13165 kB/s 74x CD 9x DVD
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: audio 86 MB (08:35.01) no preemp copy
Track 02: audio 56 MB (05:38.24) no preemp copy
Track 03: audio 57 MB (05:42.16) no preemp copy
Track 04: audio 45 MB (04:29.69) no preemp copy
Track 05: audio 37 MB (03:41.97) no preemp copy
Track 06: audio 46 MB (04:35.54) no preemp copy
Track 07: audio 47 MB (04:43.72) no preemp copy
Track 08: audio 32 MB (03:10.85) no preemp copy
Track 09: audio 41 MB (04:04.38) no preemp copy
Track 10: audio 46 MB (04:35.96) no preemp copy
Track 11: audio 33 MB (03:19.34) no preemp copy
Track 12: audio 32 MB (03:14.06) no preemp copy
Track 13: audio 44 MB (04:26.40) no preemp copy
Track 14: audio 46 MB (04:35.25) no preemp copy
Total size: 659 MB (65:18.61) = 293896 sectors
Lout start: 659 MB (65:20/46) = 293896 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 65949
Starting to write CD/DVD at speed 24 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 0 of 86 MB written.
Track 01: 1 of 86 MB written (fifo 100%) [buf 99%] 1.1x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 02 1C 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.016s timeout 40s
/usr/bin/cdrecord: The current problem looks like a buffer underrun.
/usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/cdrecord: Please report.
/usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 1270080 bytes
Writing time: 13.459s
Average write speed 292.9x.
Min drive buffer fill was 99%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 28.666s
/usr/bin/cdrecord: fifo had 84 puts and 21 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 6 times full, min fill was 87%.
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=24 -tao -dummy driveropts=burnfree -eject -useinfo -audio -shorttrack /tmp/kde-matt/k3b_audio_0_01.wav /tmp/kde-matt/k3b_audio_0_02.wav /tmp/kde-matt/k3b_audio_0_03.wav /tmp/kde-matt/k3b_audio_0_04.wav /tmp/kde-matt/k3b_audio_0_05.wav /tmp/kde-matt/k3b_audio_0_06.wav /tmp/kde-matt/k3b_audio_0_07.wav /tmp/kde-matt/k3b_audio_0_08.wav /tmp/kde-matt/k3b_audio_0_09.wav /tmp/kde-matt/k3b_audio_0_10.wav /tmp/kde-matt/k3b_audio_0_11.wav /tmp/kde-matt/k3b_audio_0_12.wav /tmp/kde-matt/k3b_audio_0_13.wav /tmp/kde-matt/k3b_audio_0_14.wav
|