KDE-Forum.org

I use SuSE 10.2, KDE 3.5.5

my monitor (sax2)
resolution 3200 x 2400
21.1 " - 4/3 - X-pivot 429 mm, Y-pivot 322 mm,
rate: horizontally 30 - 95 kHz, vertical 50 - 160 Hz

/etc/X11/xorg.conf (shortened):

Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 429 322
HorizSync 30-95
Identifier "Monitor[0]"
ModelName "P810"
VendorName "VIEWSONIC"
VertRefresh 50-160
UseModes "Modes[0]"
EndSection

Section "Device"
BoardName "GeForce4 MX 440 with AGP8X"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
Option "usevnc" "no"
Option "Logo" "off"
Screen 0
VendorName "NVidia"
EndSection


hwinfo (shortened):

66: None 00.0: 10000 Monitor
[Created at fb.71]
Unique ID: rdCR.EY_qmtb9YY0
Hardware Class: monitor
Model: "Generic Monitor"
Vendor: "Generic"
Device: "Monitor"
Resolution: 1024x768@76Hz
Driver Info #0:
Max. Resolution: 1024x768
Vert. Sync Range: 50-90 Hz
Hor. Sync Range: 31-61 kHz
Config Status: cfg=no, avail=yes, need=no, active=unknown

Kde control-center shows in kcmdisplay only
max Resolution 1600 x 1200 - 50 (max 61) Hz

How can I use a resolution 2048x1536
refresh 50 - 160 with KDE without make
the system cracy/mad, written in kcmdisplay

Many thanks for helping

Kind Regards
b.adda